Create a free account to continue

A Biofuel for Automated Heat Generation

Researchers revealed that the most common type of biomass straw, chips, sawdust, and peat are feasible for self-sustained pyrolysis.

Mnet 196645 Peat Tomsk Polytechnic University
This is Arkadievsky peat at the Tomsk Oblast in Siberia Russia. (Tomsk Polytechnic University)This is Arkadievsky peat at the Tomsk Oblast in Siberia Russia. (Tomsk Polytechnic University)

Pyrolysis—a process of biomass decomposition—can be organized automatically for heat generation out of the most common type of biomass such as peat and straw. That is, it is sufficient to heat biomass to a certain temperature and then the process proceeds in the autothermal mode due to its own heat release. This technology was studied by scientists from Tomsk Polytechnic University in the article published in the Journal of Thermal Analysis and Calorimetry.

The development of research in this domain will make energy generation out of biofuel more resource efficient and feasible.

The scientists presented the study results for such types of biomass as pine sawdust, chips from various types of wood, straw, two types of peat—from the Arkadievsky and Sukhovskoye deposits from the Tomsk Oblast. They are the most common types of biomass in the region and typical for Russia as a whole. In order to generate heat and energy valuable products—tar, solid carbonaceous residue, and combustible gas—TPU scientists subjected it to pyrolysis, the process of thermal decomposition of organic matter in an oxygen-free environment.

On the planet, there is a huge amount of organic matter which can be used as biofuel, i.e. products of the plant of animal worlds as well as the vital activity of human society. Such fuel is certainly much more environmental friendly compared to traditional fuels.

"However, to replace or just compete with fossil organic raw materials, fuel production out of biomass should become more feasible," said Roman Tabakaev, a co-author of the study and research fellow at the Butakov Research Center.

One of the ways to produce heat from biomass is pyrolytic processing. Pyrolysis is the basis for many modern technologies. including the production of biofuels out of biomass and conversion of biofuels.

Despite the fact that pyrolysis is known for a long time, scientists have not come to a common opinion as far as this energy-consuming technology. Some believe this is an unprofitable wasteful technology, as it requires energy expenses to decompose organic matter. Others believe that pyrolysis can undergo with heat release that can be used to maintain the process itself. The study carried out by TPU researchers vividly prove this assumption.

In autothermal processes, reaction temperature is maintained due to own thermal release. It allows the reduction of the cost of the technological process, increasing the efficiency of processing and the reduction of the number of auxiliary equipment.

In the respect of pyrolysis, an autothermal regime is a process in which the magnitude of the thermal effect exceeds thermal costs. That is, at the decomposition of biomass much heat should be released than it takes to heat it. To identify the values of these indicators—the heat effect and heat costs—for specific biomass types, the authors of the article conducted thermogravimetric (TGA) and differential thermal analyzes, and also experimentally processed the above mentioned biomass samples.

"The experimental and analytical data obtained indicate that during the pyrolysis of straw, chips, sawdust, and peat from the Sukhovskoy deposit much heat is released than it is required for their heating," said Tabakaev. "In the case of peat from the Arkadievsky deposit, the thermal effect was less than the cost of heating."

This effect for straw and wood is associated with the processes of decomposition of cellulose, lignin, and hemicellulose during pyrolysis. These processes generate additional heat. In the case of Sukhovskoy peat, this effect is due to the decomposition of cellulose, humic and fulvic acids.

Thus, the difference between the received and spent heat for dried straw samples was +654.5 kilojoules per kilogram (kJ / kg), for chips - +282.0 kJ / kg, for sawdust - +303.6 kJ / kg, for Sukhovskoy peat - +275.3 kJ / kg.

"In the article, we have shown by calculation the possibility of organizing such an autothermal pyrolysis. Now, our task is to physically realize pyrolysis in an autothermal regime with continuous supply of raw materials to the reactor, for which currently we are creating an experimental installation," said Tabakaev. 

(Source: Tomsk Polytechnic University)

More in Chemical Processing