Traffic routes in and around manufacturing facilities are carefully considered when planning and implementing combustible dust explosion venting to the outside with conventional explosion panels. With conventional explosion venting, the pressure wave and flame blast must be deflected or explosion panels must be installed such that there is large scale clearance around the area that could be affected by such a pressure wave and blast. The TARGO-VENT has been developed to provide a cost effective, safe solution to this concern. It is an add-on module to REMBE, INC. explosion panels which limits the opening angle of an explosion panel. Should the panel rupture due to an event, the explosion pressure wave, flames and heat are all directed into “safe” areas, decreasing the otherwise required “hazard” areas.