REGULATORY INTELLIGENCE DATA BASE
April 01, 2016
DEPARTMENT OF THE US WHITE HOUSE
AGENCY GROUP 09
INDSTRY GROUP 91
REGION GROUP 04
FACT SHEET: OBAMA ADMINISTRATION ANNOUNCES NEW REVOLUTIONARY FIBERS
AND TEXTILES MANUFACTURING INNOVATION HUB IN CAMBRIDGE, MA AND NEW REPORT
ON $2 BILLION IN MANUFACTURING R&D INVESTMENTS
CQ-Roll Call, Inc.
1255 22nd Street N.W.
Washington, D.C. 20037
Transcript/Programming: Tel. 301-731-1728
Sales: Tel. 202-419-8500 ext 599
CQ-Roll Call, Inc.
is a private firm not affiliated with the U.S. Government.
Copyright 2016 by CQ-Roll Call, Inc.
Washington, D.C. U.S.A.
All materials herein are protected by United States copyright law
and may not be reproduced, distributed, transmitted, displayed,
published or broadcast without the prior written permission of
CQ-Roll Call, Inc. You may not alter or remove any trademark,
copyright or other notice from copies of the content.
Eighth manufacturing innovation institute brings over $300 million in public-private investment from leading universities and manufacturers to develop futuristic fabrics and textiles, helping accelerate the revival of textiles manufacturing in the United States
Today, Secretary of Defense Ash Carter announced that a leading consortium of 89 manufacturers, universities, and non-profits organized by the Massachusetts Institute of Technology (MIT) will spearhead a new manufacturing innovation institute in partnership with the Department of Defense focused on securing U.S. leadership in revolutionary fibers and textiles manufacturing.
The new Revolutionary Fibers and Textiles Manufacturing Innovation Institute in Cambridge, MA, will combine over $75 million of Federal resources with nearly $250 million of non-Federal investment in innovative fabrics and textiles with novel properties ranging from being incredibly lightweight and flame resistant, to having exceptional strength and containing electronic sensors. With wide-ranging applications, these technical textiles can forge protective gear for firefighters impervious to the hottest flames, replicate the sensing capabilities of a smart watch into a lightweight fabric, or detect when a wounded soldier needs to be treated with an antimicrobial compression bandage.
This new institute is the eighth manufacturing hub to be awarded by the Obama Administration, building on the President's vision to create a National Network for Manufacturing Innovation (NNMI) of at least 15 hubs across the country during his Administration. Collectively, the Federal government's commitment of nearly $600 million to the eight awarded institutes has been matched by over $1.2 billion in non-Federal investment from across industry, academia, and state governments. The institutes, each led by manufacturing experts renowned in their field, have attracted over 800 companies, universities, and non-profits as members of the National Network for Manufacturing Innovation.
The American textile industry is adding jobs for the first time in decades, increasing shipments by 14 percent from 2009 to 2015, and growing exports globally with a 39 percent increase in exports from 2009 to 2015. After a decade in decline during the 2000s, the U.S. manufacturing sector as a whole has added nearly 900,000 jobs since February 2010. Today's announcement builds on this momentum in American textile manufacturing and lays the foundation for future leadership and innovation in the production of sophisticated fibers and textile technologies.
In addition to the manufacturing institute award, today the Obama Administration released a new report detailing a snapshot of Federal priorities across 13 agencies for research and development investment in advanced manufacturing technologies. The President's FY2017 Budget builds on the Obama Administration's success in increasing manufacturing research and development by 40 percent since 2011 by proposing to further grow Federal investment in manufacturing technologies to $2.1 billion.
Early Successes from the National Network for Manufacturing Innovation
The new institute is part of the National Network for Manufacturing Innovation (NNMI) launched in 2012. From the very first manufacturing institute pioneering novel 3D printing technologies in Youngstown, OH, to the most recently awarded institute pushing the boundaries on flexible hybrid electronics in San Jose, CA, each of the now eight institutes is part of a growing innovation network dedicated to securing U.S. leadership in the emerging technologies and manufacturing capabilities required to win the next generation of advanced manufacturing.
Each manufacturing institute is designed to build U.S. leadership and regional excellence in critical emerging manufacturing technologies by bridging the gap between early research and product development; bringing together companies, universities, and other academic and training institutions, and Federal agencies to co-invest in key technology areas that can encourage investment and production in the United States while serving as a `teaching factory' for workers, small businesses, and entrepreneurs looking to develop new skills or prototype new products and processes.
The Revolutionary Fibers and Textiles Manufacturing Innovation Institute being announced today is the eighth institute awarded to date.
Already, these investments are generating wins for U.S. manufacturing, including -
In March, two photonics companies announced $1.4 billion of investment and over 800 manufacturing jobs in Rochester, NY, leveraging the facilities and capabilities of AIM Photonics, the Integrated Photonics Manufacturing Innovation Institute. These investments are helping revive a region that was once a global powerhouse for optics manufacturing.
To help anchor production of new semiconductor technologies in the United States and accelerate the commercialization of advanced power electronics, in March the Power America Manufacturing Innovation Institute successfully helped X-FAB in Lubbock, TX, upgrade a hundred-million dollar foundry to produce cost-competitive, next-generation semiconductors, enabling new business opportunities to sustain hundreds of jobs.
Using next-generation metals manufacturing techniques, Lightweight Innovations for Tomorrow (LIFT), the institute in Detroit focused on lightweight metals, has successfully reduced the weight of core metal parts found in cars and trucks by 40 percent, helping improve fuel efficiency and save consumers dollars at the pump. In addition, LIFT has introduced curriculum in 22 states to train workers on the use of lightweight metals.
America Makes has attracted hundreds of millions of dollars in new manufacturing investment to its region, including helping to attract GE's new $32 million global 3D printing hub and spurring Alcoa to invest $60 million in its New Kensington, PA facilities, both of which will benefit from proximity to America Makes and its expertise in 3D printing with metal powders.
While still in its early stages, the National Network for Manufacturing Innovation is already having a visible impact on advanced manufacturing in America as detailed in the NNMI Annual and Strategic Reports released by the Department of Commerce.
New Report from the National Science and Technology Council (NSTC) on Federal Priorities for Manufacturing Research and Development
Growing and sustaining an innovation ecosystem for cutting-edge advanced manufacturing technologies, like revolutionary fibers and textiles, requires a concerted effort across government, industry, and academia.
To foster a shared technological vision across the public and private sectors, today the NSTC Subcommittee on Advanced Manufacturing, representing 13 Federal departments and agencies, released Advanced Manufacturing: A Snapshot of Priority Technology Areas Across the Federal Government, a report detailing common priorities for research and development in advanced manufacturing technologies and initiatives to strengthen manufacturing education and workforce development. Among the shared-priorities identified in this new report are:
Advanced materials manufacturing: designer materials that are "born ready" for specific next-generation products, approaching atomic precision at kilogram scales
Bio-manufacturing for regenerative medicine: repairing and replacing cells, tissues, and organs that might one day lead to 3D-printed organs
Continuous manufacturing for pharmaceuticals: uninterrupted production enabling greater quality, yield, and flexibility toward personalized medicine
Launched in its current form in 2015-following recommendations from the university and industry leaders of the President's Advanced Manufacturing Partnership-the NSTC Subcommittee on Advanced Manufacturing seeks to identify gaps in the Federal advanced manufacturing research and development portfolio and policies; programs and initiatives that support technology commercialization; methods of improving business climate; and opportunities for public-private collaboration.
The Subcommittee's new report captures technology areas in advanced manufacturing that are current priorities for the Federal Government and are strong candidates for focused Federal investment and public-private collaboration. Recognizing these areas is a critical step toward identifying smart, strategic investments that build on our strengths-revving the engines of American ingenuity and honing the skills of the world's most productive workforce.
Additional Information on the Revolutionary Fibers and Textiles Manufacturing Innovation Institute:
To lead the new Revolutionary Fibers and Textiles Manufacturing Innovation Institute, MIT is standing up Advanced Functional Fabrics of America, or AFFOA, a new consortium headquartered in Cambridge, MA, uniting 89 partner companies, non-profits, independent research organizations, universities and start-up incubators to help ensure that America stays at the leading edge of fiber science and the production of modern-day fabrics and fibers with extraordinary properties.
This new manufacturing innovation institute will harness the Northeast region's community of technical textile manufacturing entrepreneurs and innovators, strengthened by a robust nationwide network of manufacturers, to underpin a national fibers and textiles manufacturing ecosystem and position the United States for growing leadership in this critical technology area.
The institute will bring together nontraditional partners to integrate fibers and yarns with integrated circuits, LEDs, solar cells, and other devices and advanced materials to create textiles and fabrics that can see, hear, sense, communicate, store energy, regulate temperature, monitor health, change color, and more. For example, the institute will pair the likes of audio equipment maker Bose, computer chip maker Intel, and nanofiber manufacturer FibeRio with more customary textile manufacturers and textile users like Warwick Mills, Buhler Yarns, and New Balance.
The institute will work to commercialize innovations being developed in the labs of member universities including MIT, the University of Massachusetts - Amherst, Cornell University, and others, while partnering with local workforce organizations to train workers on how to manufacture these technologies in the United States. The institute will also accelerate technology transfer to enable defense and commercial applications such as shelters with power generation and storage capacity built into the fabric, ultra-efficient, energy-saving filters for vehicles, and uniforms that can regulate temperature and detect threats like chemical and radioactive elements in order to warn warfighters and first responders. The new institute's headquarters in Cambridge, MA will host a prototyping facility designed to help start-ups test their first products and scale up new technologies into full production, to ensure that textile technologies invented in America are made in America.
The winning team includes the following 52 industry members and non-profit organizations, as well as 37 additional partners across 28 states:
52 Companies and Non-Profit Organizations: Analog Devices, Ben Franklin Technology Partners, Bluewater Defense, Bose, Buhler Quality Yarns, Business Education Design & Research (BEDR) Consortium, ChK Group, Corning, Delaware Valley Industrial Resource Center (DVIRC) - Southeast PA MEP, DuKorp, DuPont, EHMKE, Electronic Textile, eSpin, FabNewport, Faurecia, FibeRio, Flex, FLIR, Hills, Ikove Venture Partners, Inman Mills, Intel, Macromolecular, Manufacture NY, MassMEP, Medtronic, Milliken, MiniFIBERS, Ministry of Supply, Nanocomp Technologies, Nanoterra, National Occupational Competency Testing Center (NOCTI), New Balance, Nike, Offray Specialty Narrow Fabrics, Per Vivo Labs, Protect the Force, R&M International, RTI International, SAP, Steelcase, Stitch Texas, Ten97 Technologies, The Corridor - FL, The Solar Energy Consortium (TSEC), V2 Composites, Vartest Laboratories, Vecna, Vorbeck Materials, VF Corporation, and Warwick Mills
32 Universities, Colleges and Other Schools: Auburn University, Carnegie Mellon University, Clemson University, Connecticut College of Technology RCNGM-ATE, Cornell University, Drexel University, Fashion Institute of Technology, Florida Atlantic University, Gaston College, Iowa State University, Jefferson University, Kansas State University, Massachusetts Institute of Technology, Ohio State University, Penn State, Rice University, Temple University, University California-Davis, University of Central Florida, University of Massachusetts-Amherst, University of Arkansas, University of Delaware, University of Georgia, University of Illinois (National Center for Supercomputing Applications), University of Kentucky, University of Michigan, University of Minnesota, University of Rhode Island, University of Tennessee - Knoxville, University of Texas - Austin, Virginia Tech, and Washington State University
5 State Government and Regional Organizations: State of California, State of Georgia, Commonwealth of Massachusetts, City of Philadelphia, and Industrial Development Agency (IDA) - Orange County, NY
28 States Represented: AL, AR, CA, CT, DE, FL, GA, IA, IL, KS, KY, MA, MI, MN, NC, NJ, NH, NY, OH, OR, PA, PR, RI, SC, TN, TX, VA, WA