Itoh Denki

135 Stewart Rd., Hanover Industrial Estates
PA 18706
United States
Website:
https://www.itohdenki.com
Phone:888-310-8811
More from Itoh Denki
title
Home
F-RAT-S (Flat Right Angle Transfer)
F-RAT-S (Flat Right Angle Transfer) System is a drop in installation into existing MDR conveyor frames. Powered by three 24V DC Itoh Denki Motorized Rollers. Run-On-Demand feature increases energy savings over traditional transfers. No pneumatics are needed to move your product in 4 different directions. 3 motors; spine, lifting/dropping, and transfer rollers. Controlled with Itoh Denki's IBE-01 two zone control card. Transfers products up to 110lbs. (51kg); Minimum package size: 300mm x 300mm; Minimum height: 170mm; Transfer capacity: 2500/hr; Available in 4 sizes: 15" x 30", 20" x 30" and 28" x 30"
November 6, 2014
title
Home
PM635FS/KE DC Motorized Driven Roller
Motorized Conveyor Roller for Heavy Duty Applications - the PM635FS/KE. Standard torque or High torque; 2.5" diameter; 24V long life brushless DC motor; 11 gauge carbon steel tubing; ABEC 1 bearings; low profile requirement; zinc plated die-cast end caps; heavy duty pallet handling applications. 11/16" threaded hex shaft standard. Transport product up to 2500/4000lbs. (FS/KE). Speeds up to 279/855fpm (FS/KE); Available with roller chain sprockets and poly V-Belt Drive. Sprockets welded to tube or double sprocket end cap. Easy retro fit for existing pallet handling applications. With or without spring loaded shaft. KE model 1000mm power cable standard.
November 6, 2014
title
Home
PM486FE/FP DC Motorized Driven Roller
One of our Best Sellers - the PM486. Available in standard torque (FE) or high torque (FP). 1.91" diameter, 24V long life brushless DC motor. Spring loaded end for quick install/removal; zinc plated carbon steel tube; ABEC 1 bearings; die-cast zinc end caps; dynamic braking standard; transports product up to 200/400 lbs (FE/FP). Speeds up to 699/973 FPM (FE/FP). 7/16" plain hex shaft standard (FE model); 7/16" threaded hex shaft standard (FP model). Many options available including low-temp, waterproof, clean room, grooved or straight tube, pulley end cap options, wide variety of lagging. DC MDRs reduce energy consumption and noise in your facility, and fit into existing conveyor frames.
November 6, 2014