#1 MYTH: LEDs are not a cost-effective replacement for fluorescents.
FACT: LEDs are excellent replacements for fluorescents, HIDs and other industrial lighting.
While initial purchase costs for LEDs are higher than fluorescents, the price difference is a fleeting issue, at best.
Unlike past decades, when lighting-related energy costs played a relatively small role in purchase decisions, a decade
of rapidly escalating energy prices has transformed energy use into the major cost driver for industrial lighting.
Because intelligent LEDs are dramatically more energy efficient than fluorescents or even plain LEDs, not only are
they more cost-effective in current terms, but an imperative in a rising-energy-cost environment. As a result, many
industrial organizations are no longer willing to trade off marginally shorter initial payback periodsâusually measured
in months, not yearsâfor a decade or more of substantially higher energy costs. From a purely financial perspective,
it no longer makes sense. Factor in the elimination of maintenance and mercury disposal costs, and the advantages
of LEDs are overwhelming.
For example, if you compare the annual energy costs of a 100-fixture installation of 6-lamp T8 HIF vs. a 13,000-lumen
Intelligent Lighting System in a $0.10 kWh area with 20% occupancy, the comparison is as follows:
6-Lamp T8 HIF 13,000-Lumen Intelligent Lighting System
Annual Energy Costs: $17,432 $2,715
5-Year Energy Costs: $87,160 $13,575
The 5-year energy costs for the LED-based Intelligent Lighting System are less than a single yearâs energy costs for
the HIF. And LEDs have no ongoing maintenance requirements (re-lamping or re-ballasting).
#2 MYTH: LEDs are too new of a technology.
FACT: LEDs have been in widespread use for more than a decade, including critical
safety-related applications.
Following more than a decade of widespread use, LEDs are a mature, reliable technology that has earned its place in
the mainstream lighting market. LEDsâ surging popularity is based on their unique ability to provide dramatically more
energy-efficient, sustainable and cost-effective lighting. By combining much greater flexibility and control over how
lighting is used within a facility, with higher quality light, LEDs are rapidly becoming the illumination technology of
choice for industrial applications. Their customer-proven durability is well suited to high-intensity industrial applications,
including manufacturing, warehousing, maintenance depots, hangars, and numerous others.
12 Myths Surrounding Industrial LED Lighting
LEDs have been in widespread use for more than a decade, lighting everything from traffic signals and cell phones to
computers and TVs, due to their extremely low energy use, long life span and high-quality light. While not new, LEDs
now offer unique and compelling characteristics for industrial applications. LEDs are more durable, reliable and lack the
maintenance requirements (e.g. re-lamping, re-ballasting) associated with traditional lighting. With properly designed
fixtures, LEDs
⢠Can operate well in all temperature environments,
⢠Are inherently controllable (instantaneous on/off and dimming), and
⢠Are much more energy efficient.
Traditional industrial light sources share few, if any, of these characteristics. This is because, unlike high-intensity fluorescents
(HIF), high-intensity discharge (HID), high-pressure sodium (HPS) and metal halides, LEDs are semiconductors, not light
bulbs. This fundamental difference is the source of many of the misconceptions surrounding LEDs. The challenge now is
that the outdated evaluation criteria, which were applicable to legacy lighting, are still in use. So, itâs time to delve into
those myths and look at the underlying facts:
LED MYTHS AND FACTS
#3 MYTH: LEDs have magnetic ballasts that require servicing and/or replacement.
FACT: LED lights use electronic drivers, which don't need replacement.
A magnetic ballast is an electrical circuit that regulates the amount of current that passes through a gas discharge
light, controlling both the starting and operating voltages. Over time, magnetic ballasts used in traditional industrial
lighting (HID, HIF, HPS, metal halide) wear out, requiring servicing and/or replacement. For large industrial facilities
with hundreds of fluorescent or HID fixtures, servicing ballasts is an expensive propositionâin terms of manpower,
workplace disruptions and component replacements.
LEDs are semiconductors that efficiently generate light, and require electronic drivers. In a well-designed fixture,
the driver is a critical component, managing the power delivery and playing a vital role in overall energy efficiency of
a fixture. It is a key element in fixture power consumption per lumen delivered, heat generation, and longer fixture
lifetimes. Because LEDs use electronic drivers, they provide LED manufacturers with the opportunity to integrate
control features (e.g. sensing, dimming and instantaneous on/off) into lighting fixtures for maximum functionality
and efficiency.
#4 Myth: LED prices will go down, so it pays to wait.
Fact: Waiting for LED fixture prices to drop will cost you money.
The energy savings from upgrading a facility's lighting to LEDs far exceed any incremental price declines in
LED-based fixtures.
The major factors associated with industrial lighting are up-front costs and energy use, making the frequently cited
comparison between computer processing chips and LEDs inappropriate. Yes, LED chips are declining in price,
but much of the cost of LED lighting is in the system that is built around that chip, so the potential chip price decline
only impacts about 1/3 of the fixture.
A quick glimpse at a typical facility's operating budget shows that lighting is one of the largest energy loads.
By reducing that energy usage 50% to 90% (depending on the application and manufacturer), LEDs pay back in
energy savings much more than could ever be accrued through incremental LED price declines. If anything, energy's
upward price trend makes waiting even more costly. It does not pay to wait. It does pay to act.
Using the same $0.10/kWh rate, for example, a single 6-lamp T8 fixture typically consumes $174 in lighting-related
energy costs per year. An intelligent LED fixture consumes just $27, resulting in a net savings of $147 per
year (not including the additional daylight harvesting, maintenance and/or refrigeration savings associated with
intelligent LEDs). This means that the cost of an LED fixture would have to drop dramatically in a single year to
make waiting worthwhile.
#5 MYTH: LED drivers require replacement.
FACT: Well-designed LEDs should not have driver failures.
During the usable lifetime of an LED, which generally exceeds 50,000+ operating (or âonâ) hours (or more than
twice the lifetime of a traditional light source), it is extremely unlikely that a driver or any other component part
would need to be replaced. Furthermore, in a well-designed LED fixture, frequent on/off switching does not shorten
its useful life, unlike traditional fluorescent or HID lighting fixtures whose useful lifetimes are significantly reduced
by such operations. In fact, frequent switching actually lengthens the useful life of an LED, as turning off an LED
fixture slows the pace at which total operating hours accrue.
#6 MYTH: LEDs contain mercury.
FACT: LEDs do not contain mercury.
Unlike fluorescents, LEDs do NOT contain mercury, a hazardous material with high disposal costs, and which is
dangerous when used in food-related environments, in particular.
12 Myths Surrounding Industrial LED Lighting
12 Myths Surrounding Industrial LED Lighting
#7 MYTH: LEDs don't work well in high temperature environments.
FACT: Well-designed LEDs work well in a broad range of environments.
During temperature tests conducted by independent labs, LEDs performed at least equally as well as fluorescents
and HID (see note below on testing parameters). Quality matters and a well-designed lighting system that carefully
manages heat dissipation is a prerequisite for lighting operating at any temperatureâhot, cold or anywhere in-between.
At the same time, it is important to note that LEDs do perform extraordinarily well in cold environments, an area
that has been particularly challenging for other types of lighting, such as fluorescent and HID.
Note : An important indicator of the quality of an LED solution's heat/thermal management is junction temperature,
which measures the internal temperature of the LED chip within the lighting fixture. For specified operating
intervalsâusually 6,000- and 10,000-hoursâthese values are commonly available as are part of industry standard
tests performed by independent testing labs. Be sure to request all testing data documents from your LED supplier,
including LM-80 and TM-21.
#8 MYTH: LED light is too blue.
FACT: LED lighting is 'cooler' than many of the traditionally yellowish colors of high-
pressure sodium and HID lights.
LED lighting is available in a variety of colors, most of which are in the 5000K temperature range, making them
âcoolerâ than the extra-yellow high-pressure sodium fixtures they frequently replace. Customer experience suggests
that this is an advantage for LEDs, as they are quick to cite improvements in light quality and effectiveness as key
attributes of their LED lighting installations.
#9 MYTH: LEDs are not bright enough for industrial applications.
FACT: Increases in LED efficacy have made LEDs ideal for industrial applications.
When LEDs were first introduced, a limited range of output was available, some of which were not bright enough
for high-intensity applications. This is no longer the case. Today, a complete range of fixturesâfrom relatively
low- to extremely high-lumen outputsâare available to industrial customers, allowing facilities to select the
intensity that is appropriate for its specific needs. Light levels can be further enhanced through proper optics that
ensure that light placement is aligned with the application, e.g. narrow racked aisles have different requirements
than open spaces. Further, with efficacy ratios approaching 100 lumens per watt, there is no more energy-efficient
illumination source available.
#10 MYTH: LEDs are too bright for high-intensity applications
FACT: High-output lights are bright by design, but well-designed LEDs manage glare
and light placement with optics.
All high-output lights are bright if you look directly at them and LEDs are no exception. As is typical with any new
lighting installation, people check LEDs out by looking directly at them. Once the newness wears off, this typically
passes quickly and is not a commonly heard complaint. Well-designed optics on LED fixtures also minimize direct
brightness and glare perceived when looking at an LED fixture. And, LEDs now have excellent color temperature
for industrial environments.
#11 MYTH: Unlike traditional light sources, LEDs contain rare earth elements.
FACT: All contemporary light sources (e.g., fluorescents, LEDs) use rare earth
elements, but theyâre not rare.
âRare earth elementsâ is the label given to 17 chemical elements that, contrary to their name, really aren't that
rare. Specifically, rare earth phosphors (e.g. europium, terbium and yttrium) are used alone, or mixed together, to
produce different color-qualities or intensities of light. Unlike mercury, which is highly toxic, no special requirements
exist for the disposal of products that use rare earth elements.
All Rights Reserved Š 2012
Digital Lumens Incorporated
Subject to change without notice.
DOC-000095-00 Rev A 06-12
www.digitallumens.com
110 Canal St, 7th Floor
Boston, MA USA 02114
+1 (617) 723-1200
#12 MYTH: LEDs don't dim smoothly.
FACT: Well-designed LEDs offer smooth, gradual dimming to manage light levels
and energy.
Once again, quality matters. Well-designed LEDs offer gradual dimming across millions of increments, enabling
facilities to smoothly vary the amount of lighting reaching a particular surface.
Further, when it comes to dimming, one of the most important variables is control. Can each individual fixture, or
group of fixtures, be dimmed to target settings? Can these settings be easily modified through centralized controls
that support rules-based logic (e.g. if a space is unoccupied for more than a user-defined number of seconds, say
60 seconds, then dim the lights by a user-defined percentage, say 90%)? That granularity of control maximizes
lighting functionality and energy savings.
CONCLUSION
Interest in LED lighting is at an all-time high as industrial facilities increasingly zero in on energy efficiency, sustainability
and cost containment as key metrics for capital investment decisions. Given the importance of these metrics to a facilityâs
bottom line and long-term competitiveness, few question that LEDs will soon become the lighting technology of choice
in the industrial sector. The key is for customers to become knowledgeable about LEDsâwith accurate information,
independent test data, and feedback from the growing base of real-world installations willing to talk about their successes.
Be sure to ask any industrial LED lighting company you speak with for full test results (LM-79, LM-80 and TM-21), and
relevant listings (UL, cUL, NOM, or CE, for example). For customers in the United States, check that any products you
are considering are included on the DesignLights Consortiumâs (DLC) Qualified Products List (www.designlights.org),
which includes products that have met the DLC standards and qualify for rebates among participating utilities.
12 Myths Surrounding Industrial LED Lighting