Midwest Motion Products has released a new DC gear motor. It accepts any 24 volt DC source, including battery power, and measures 2.14” in diameter by 7.2” long. It also has:
- A keyed output shaft of ½” diameter by 1.5” long.
- 4 “face mount” M5 threaded holes, equally spaced on a 40mm diameter B.C. for easy mounting.
- An output rated at 50 in. lbs continuous torque at 110 RPM, and 89 in. lbs peak.
- A weight of approximately 3.5 pounds.
- Full load torque generate with 4.3 amps at 24 volts DC.
- Motor windings for 12, 28, 36, 48, 60 & 90 volts available.
- IP 54 protection level rating.
- Variable speed controls.