Advertisement
Articles
Advertisement

Power Quality Problems Plague Manufacturing’s Push For Productivity

Mon, 01/13/2014 - 12:12pm
Ben Grimes, Chief Technology Officer, Innovolt

Ben Grimes, Chief Technology Officer, InnovoltAs manufacturing continues to fight back from years of stagnation; productivity has once again become the center of attention. Recent Bureau of Labor Statistics benchmarks indicate that industry-wide productivity is beginning to rebound, with manufacturing productivity increasing 2.3 percent over the last four quarters. These results — while good news to the overall economy — only add to the pressure on individual businesses to optimize productivity in order to stay competitive.

Unfortunately, big leaps in technology will be difficult to achieve. Most manufacturers have implemented “game changing” productivity tools like ERP systems and CAD tools, however new technologies that have the potential to drive a spike in U.S. productivity are likely out of reach for most businesses for at least 5-10 years. Instead, plant managers, engineers and even production component providers must look at every square inch of the shop floor to find opportunities to maximize productivity and drive competitiveness.

Nothing affects productivity as dramatically as essential equipment downtime. Industry analysts estimate that downtime costs factories at least 5 percent of their productive capacity, with many factories losing as much as 20 percent of their productivity. A recent Oracle Corporation study estimates that equipment downtime can cost large businesses an average of $100,000 per hour. Oracle shows that for a large company, reclaiming just one percentage point of equipment can be worth as much $7,358,400 per year. At average size companies, Oracle estimates the opportunity to be close to $1,000,000 per year — both significant opportunities in an era where every dollar of productivity is vital.

And while most manufacturers have comprehensive equipment maintenance and service programs in place to minimize downtime and quickly restore equipment to service when downtimes do occur, the vast majority of manufacturers pay much less attention to a problem that, according to Electric Power and Light Magazine, causes 30 to 40 percent of business downtime: power quality fluctuations.

Power is the lifeblood of manufacturing. The U.S. Energy Information Administration estimates that industrial energy consumption will increase from a level of 191 quadrillion Btu in 2010 to 288 quadrillion Btu in 2035. In fact, industrial operations consume about one half of all electricity generated worldwide, largely due to the massive and constantly moving mechanical operations that take place in plants in the form of industrial motors, pumps and fans. However, the integration of sensitive electronics into most logic assemblies has made the circuitry (and therefore productivity) of the equipment that drives industrial automation much more susceptible to power quality fluctuations.

Power quality fluctuations take many forms, including sags, surges, brownouts and overages, and over the course of time they take an enormous toll on productivity. A single voltage dip lasting only 100 milliseconds — a relatively common occurrence on our aging and stressed power grid — can have the same effect on an industrial process as a power outage lasting several minutes or more. One study estimated that industrial plants experience between 10 and 40 power disturbances a year, with over half of these events likely to impact equipment and processes. Collectively, the U.S. Department of Energy estimates that the U.S. economy loses more than $120 billion in productivity every year to poor power quality and reliability.

The causes of power fluctuations are both numerous and commonplace in most businesses, with an estimated 80 percent of the fluctuations caused by events inside the facility, which could include:

  • Simply turning on a large piece of equipment
  • Turning off a large piece of equipment
  • Lightning strikes that occur near power lines (direct hit not required)
  • Using equipment that generates microwaves
  • Improper wiring, either the wrong size wire for the load or excessively long runs
  • Faulty or corroded connections somewhere in the network

Clearly, power fluctuations happen multiple times a day, potentially simultaneously, and typically without attracting much attention or fanfare. And with the equipment that powers the productivity of industry so vulnerable to such relatively commonplace occurrences, it seems clear that the time has come to pay much closer attention to power anomalies. Surprisingly, in an era when advanced metrics are available for virtually every process and machine on the plant floor, power quality has largely remained a mystery.

A fall 2013 survey, from 92 executives in industries that rely heavily on electronic assets to drive their businesses, found that only 21 percent reported high levels of visibility into power disturbances that impact those electronic assets. Perhaps more shocking is the fact that more executives (29 percent) reported having no visibility into power disturbance issues, and a combined 78 percent of executives surveyed reported having either limited visibility or no visibility whatsoever.

Recent advances in power quality management technology, however, make it much easier for plant operators, engineers and control panel builders to monitor, manage and mitigate fluctuations in power quality. Powerful intelligent asset management solutions can now be hardwired into industrial equipment (or control panels) to proactively monitor the inflow of power, smooth out sags and surges, and ensure a consistent flow of high-quality power to the equipment that powers productivity and profitability.

Intelligent asset management solutions, like those developed by Innovolt, deploy microprocessor-based protection technology along with SaaS functionality that, when combined, deliver monitoring, management and analytics that collectively enable comprehensive protection, proactive service, longer mean time between failures, and, ultimately, much higher productivity.


About Ben Grimes:

Ben Grimes serves as Innovolt's Chief Technology Officer and has more than 20 years of experience in the IT industry, specifically in product development and infrastructure solutions. With strong qualifications in the end-to-end delivery of complete systems, Grimes is responsible for delivering the company's technology vision. He previously served as Corporate Strategy Officer at Avocent and led the $1.2B sale of that company to Emerson Electric. Additionally, Grimes was a Distinguished Engineer at IBM and has provided advisory services to several companies from the start-up level to Fortune 100. He received his undergraduate degree in Electrical Engineering from Purdue University and holds an MBA from the College of William and Mary.

Advertisement

Share this Story

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading